The Right Connection Matters

A reliable power system is only as good as the connections behind it. From battery cables and lugs to adapters, connectors, and extension wiring, choosing the right components helps keep your system safe, efficient, and ready for whatever you need to power.

Whether you’re wiring a small battery setup, upgrading an RV, building an off-grid system, or connecting larger power equipment, proper wire sizing and quality connectors make a real difference. Below are some of the products we recommend for creating clean, dependable connections throughout your system.

Affiliate links below

Build Your Own Battery Cables

Building a custom system? This kit gives you the wire, lugs, and heat shrink you need to make your own battery cables at the exact length you want.

Inverter to Battery Cables Build your own with a kit!

Great for custom-built systems where length of each wire matters. If you are a beginner, stick to the cables above.

Beginner Friendly Battery to Battery Cables

Connect your solar batteries in parallel or series configuration with these prefabricated cables. Great for beginners! No tools needed!

Need more places to connect?

When you have multiple batteries, inverters, chargers, and other components, bus bars make it much easier to keep everything connected and organized.

Victron 250A Bus Bars

Connect components or batteries together with a high quality bus bar. The busbars above can handle 12,800W with a 48V system and 3,200W with a 12V System.

Choosing the right cable matters.

For a simple plug-and-play setup, use a ready-made cable with MC4 connectors. Need longer runs or more flexibility? Build your own with high-quality PV cable.

Solar Panel Array to Solar Charge Controller Cable

Beginner-friendly plug-and-play cable with MC4 connectors.

Advanced Solar Panel Array to Solar Charge Controller Cable

Higher-quality PV cable for long wire runs, which requires cutting, stripping, and crimping your own connectors.

Red DC Load Wire

Durable automotive-grade wire for connecting critical 12V loads to your fuse block. Handles oil, water, vibration, and everyday abuse.

Black DC Load Wire

Heavy-duty automotive-grade wire for clean, reliable DC connections. A great choice for running critical loads from your fuse block.

High-Quality Copper DC Wire

Two wires in one jacket means a faster, cleaner install than running individual wires. Made with quality copper instead of cheaper copper-clad aluminum.

The small parts that keep your system connected.

From standard crimp connectors to heavy-duty cable lugs, these are the connectors I use for building reliable DC and battery connections. Don’t cheap out on this stuff—bad connections can overheat, corrode, and fail.

Standard Size Crimp Connectors

Use these to connect different parts of your system together. I’ve used cheap connectors before, and they overheated and failed. These are the ones I’m using now.

Large Copper Cable Lugs

Thick-walled copper lugs for making reliable battery and inverter connections. I keep plenty of these on hand because cheap ones just aren’t worth the risk.

Small Cable Lugs

Smaller, tin-plated cable lugs for connections where the larger ones won’t fit. The tin coating helps protect against corrosion, and I recommend keeping both sizes on hand when building a system.

Solar Panel Array Cable Entry Gland

Running solar cables into your vehicle? This gland gives you a clean way to pass them through the roof while helping keep water out. Just drill the holes, run the cables through, and seal it in place.

My Latest Videos

Visit my Channel

DIY Solar Power with Will Prowse

Van or RV

Boat

Cabin or Shed

Whole House

The Right Connection Matters

Build Your Own Battery Cables

Inverter to Battery Cables Build your own with a kit!

Beginner Friendly Battery to Battery Cables